Actiontec MegaPlug AV 200Mbps Review
Specifications
Standards
IEEE 802.3, IEEE 802.3u, HomePlug AV
Additional Protocols
CSMA/CA channel access scheme(upgradeable to TDMA); CO device generates a periodic beacon carrier for channel access scheme
Forward Error Correction (FEC)
Automatic Channel Adaptation
Data Rate
PHY Rate: Up to 200 Mbps over standard home power lines and 10/100 Mbps over Ethernet*
Operating Range
Up to 300 meters in wall power lines
Capable of passing through circuit breakers
Security
128-bit AES Link Encryption with Key Management
Frequency Band
2 MHz – 28 MHz
Modulation
OFDM Symbol Modulation on Line Synchronization
QAM
QPSK
BPSK
ROBO Carrier Modulation
QoS
Integrated
Prioritized Random Access
Contention-Free Access
Segment Bursting
LEDs
Power, Link, and Ethernet
Power Input
100 to 240V @ 50/60 Hz internal
Regulatory Compliance
FCC Part 15 Class B
UL
HomePlug Certification
Environmental Ranges
Temperature: 0°C to 40°C
Humidity: 10% to 90% (Non-condensing)
Highlights
- No new cables required. Uses the existing power lines in your home.
- Very Easy to Use. Simply plug in.
- Compatible with any Router or Gateway.
- Supports HomePlug speeds up to 200 Mbps*
- Integrated QoS.
- Co-exists with older 14 Mbps and 85 Mbps Home Plug devices.
- Secure data encryption.
“* Theoretical data throughput numbers are based on maximum, theoretical PHY throughput for HomePlug AV. Actual data throughput of up to 90 Mbps(UDP) seen in laboratory testing. The throughput will vary based on the condition and noise found on the power lines within the home as well as the type of Ethernet Adapter supported on each computer or other device.”
Each adapter measures just 2.25″ wide, 3.25″ tall and 2″ thick, making it small enough to be used without interfering with adjacent outlets. This kit has an average retail price of $169 and it’s available at www.actiontec.com, but as always you can find it cheaper on internet retailers.
